I've never changed one on this year Trans Am before but im pretty sure its not that different from any other V-8 car...First, drain all the oil from the pan. Second, unbolt the pan from the motor and clean very thoroughly. Third, scrape off all the old gasket and sealant on both the pan and motor. Next, put new sealant on the pan (dont get messy)and place the new gasket on the sealant (make sure to line up the holes). Finally, bolt the pan back onto the motor and torque the necessary torque specs and pour oil back into the motor.
5x120.7
16.8 gallons
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?
305 horsepower or 325 with Ram Air.
how to replace a distributor gasket on a 2000 Pontiac grand am 3.4l
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
3.4l or 3400 v6
Low Coolant. Poor coolant circulation. Intake gasket. Head gasket.
change front coil spring on 2000 Pontiac grand am
Nope. The Trans Am radio was like the rest of the Pontiac radios, but only the Trans Ams had the 'Monsoon' on the radio face. No other ones did. Nope. The Trans Am radio was like the rest of the Pontiac radios, but only the Trans Ams had the 'Monsoon' on the radio face. No other ones did.
it should have around 310 hp at the rear wheels.
Remove the belt from your 2000 Pontiac Trans Am alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.