If you mean the hole behind the camshaft between the valve cover & the head, then you remove the valve cover, install a new plug & valve cover gasket, and reinstall the valve cover. The part number for the plug is 1336763.
On the rear of the exhaust camshaft; behind distributor cap.
in the distributor in the rear of the engine. sometimes known as a hall sensor
It is at the rear of the engine and has the plug wires coming out of it.
It is at the rear of the engine and has the plug wires coming out of it.
that is stamp on the intake right rear. 65;
On top of the distributor at the rear of the engine ( it's the cap that has all the spark plug wires connected to it )
YES just follow the plug wires to the top rear of the engine and you will see them pluged into the distributer cap.
3|1 ^Front | 4|2 Rear. Firing order 1432 Front right, rear left, front left, rear right. Cylinders labeled on tin. distributor rotates clockwise.
No. Ford Explorers use coil packs located near the rear of the engine about center. answer Yes ford explorer does have distributor. Look for the distributor on the engine block by tracing the spark plug wires to it.
Climb up and lean over the top of the engine and look at the rear of the engine and you will see 9 rubber spark plug wires that are pluged into the distributor cap.
The #1 cylinder should be the first plug clockwise from the electrical connections on an HEI distributor. Or, the first plug clockwise from 3 O'Clock when facing towards the rear of the vehicle.
# 1 on the distributor cap faces to the rear and slightly towards the drivers side on your 351 Ford