All the tools you need
A set of c clamps / star keys to remove the 10- no. 14
new pins to put the spring's back in place and new rotors
New Pads if needed . Remove the tire you will see a center bolt that holds the rotor on and once removing the rotor looks like a ring or a big washer . look in side to see if there deep grooves in there if so they need turning or replacement. and put all back together as you pulled all off.
fring order for 3.5 l Pontiac Montana 2006
You can change the front turn signal, on your 2006 Pontiac Montana, by removing the retaining nuts. Remove the wiring harness. The turn signal will come free. Reverse the process to install the new turn signal.
Remove the 2006 Pontiac Montana wheel and tire. Remove the brake pad Springs. The brake pads will come off. Reverse the process to install the new brake pads.
Depending with the experience and the expertise of the mechanic. it may take up to 1 hour to replace 2006 Pontiac L Montana.
151,000
One at a time
main electrical power fuses for 06 pontiac montana
The duration to replace the motor 2006 Pontiac Montana V6 3.5 L depends with the expertise and experience of the mechanic. IT may take at least 3 hours.
comment ajouté du liquide de refroidissement pontiac torren 2006
At your local Pontiac dealer or an auto salvage yard. Check Ebay and Craigslist.org.
remove wheelremove brake caliperremove rotor
There pretty standard, nothing special about them. A hand impact makes getting the two screws out of the rear rotors easy.