For the rear sway bar links, its a bolt on part. So you have to put your two rear tires on ramps to lift them up for a good 6-12 inches off the ground to give room to operate; or just lift one rear wheel at a time with a standard jack. You might have to remove the tire if you want more comfortability while operating underneath the car. Then unbolt the link with a socket wrench or a tool, it has two bolts on it. Sometimes its jammed in there so just crack the bolt with a bolt cutter if needed. After you've taken the old link off just install the new link by bolting it on. Remember to line it up correctly and put enough torque on the bolt so its safely fastened to the sway bar. Lower the side you worked on and do the whole procedure for the other side. Its pretty easy!!!
where is the thermostat on a 1999 mazda protege?
Yes, 1999 Mazda protege window issues indeed....
Where is the flasher relay on the 1999 mazda protege
in the stearing wheel
You can use the end of the tire iron to remove the lug bolts off a 1999 Mazda Protege DX.
Yes it does have ABS. The older Protege 1997 and older dosnt.
whar are the torque specs for head bolt on a 1999 Mazda protege 1.6 engine
under the trottle body
12.5mm
You disconnect the power and ground and take the old battery out n put in a new one.
The 1999 Mazda Protege DLC fuse can be found in the fuse box. The DLC fuse will be at the bottom of the first column.
If a 1999 Mazda Protege keeps making clicking noises, you might have a bad alternator or starter. You could also have a bad ignition or solenoid.