0
You can use the end of the tire iron to remove the lug bolts off a 1999 Mazda Protege DX.
What else can I help you with?
What size is lug nut for 1999 Mazda protege?
12.5mm
What is the bolt pattern on a 92 Mazda Protege?
Lug: 5X114.3 assuming lug pattern
What size are the lug nuts on a 1999 dodge ram?
1/2 Studs
What is the lug pattern for a 2002 Mazda Protege DX?
I believe it is 4x100. Most civic and corolla wheels should fit.
What else will 13 inch rim of 1990 Toyota Corolla fit?
the lug pattern is 4x100 so cars like Mazda protege and Honda civic
How do you replace lug nut studs on a 1999 Chevy Monte Carlo?
How do you pull the wheel bearing assembly out from hub far enough to squeeze new lug nuts into place? The car is a 1999 Monte Carlo Z34.
Removal of front lug studs on a 94 Acura Integra?
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
How do you change the front lug studs on a 2000 Cavalier?
The brake caliper will have to be removed as well as the brake rotor. Then the studs can be hammered out. The new studs need to be pushed in as far as possible, then using washers as spacers the lug nut can be tightened up to pull the lug into place.
How do you replace the front lug studs on a 1995 Acura TL?
To replace the front lug studs on a 1995 Acura TL, first lift the vehicle and remove the front wheel. Then, remove the brake caliper and rotor to access the hub. Use a hammer to drive out the old lug studs from the hub, then insert the new studs and secure them in place with lug nuts, tightening them evenly. Finally, reassemble the brake components, reinstall the wheel, and lower the vehicle.
How do you replace the wheel lug studs on a 1995 Ford Escort lx?
You have to have the hub pressed out of the knuckle to replace the wheel studs.
What holds the rim in place on a car?
Wheel studs/lug nuts.
How do you replace lugs on rear axle of town?
To replace the lugs on the rear axle of a town vehicle, first, lift the car securely using a jack and support it with jack stands. Remove the wheel by loosening the lug nuts with a wrench, then take off the wheel to access the lug studs. If the lugs are damaged, use a lug stud removal tool to extract the old studs, and then insert the new lug studs through the hub. Finally, reattach the wheel, hand-tighten the lug nuts, lower the vehicle, and then torque the lug nuts to the manufacturer's specifications.
