In the trunk remove the carpet trimming in the interior of the trunk. Remove the winged bolts. Turn the light bulb until the gripper is exposed and replace it with the new one.
Get a rock
Fuses?
Make sure parking/tail lights are working - if not, may be a fuse If parking/tail are working - may be bulbs or switch
Remove the eighty thousand nuts that retain it, remove the sockets, slide it out and reverse procedure to install.
fuse relay wiring switch
Pull back the Carpet in the trunk where the tail lights are, then you should see some little plastic screws (3) unscrew them by hand and the tail light should pull out of the car with little effort.
I have the same problem, I don't know what to do.
From the inside of the trunk..... You have to remove the inside to get to the bolts.... The there you go......
I have a 2001 Buick Regal and in order to change the tail lights or Lic. plate lights you must first open the trunk lid. Now look inside the trunk lid you will see 8 or 9 plastic wingnuts, remove these wingnuts and the complete plastice panel can be removed from the trunk lid. Simply replace the buned out lights and reinstall the panel. TAL
how do you change the tail lights on a 1996 Nissan pick up?
My sister's 2002 has the same problem. The first thing I would try is to change the fuse- look on the right side of the panel next to the glove box (if it is not there, check your owners manual). If you change the fuse and it immediately blows again then it is likely a short. I am still looking for a wiring diagram to try to locate it.
Remove tire and inner fender well and change it from there. Other option is to remove the licence plate and reverse lights,reach through to the tail lights.