It is located underneath above the exhaust closest to the driver side if you didnt know. The cheapest way to do it is using a 22mm wrench and just cut the wires to the plug or you can buy the oxygen sensor removal tool at your local auto parts store and just simply turn till it comes off. You may need to pick up a can of pb blaster or ws 40 or some kind of lubricant to help remove it because it may have rusted over the years and should be cleaned out to prevent future rust. Then simply install the new one.
where is the oxygen sensor in a 1995 gmc jimmy
How do you change oxygen sensor on a 2006 Chevy aveo?"
should be on the exhaust manifold
This would be the sensor after the catalytic converter.
Yes
what is the wiring diagram for the o2 sensor on 2000 s10 blazer. it has 4 wires. what what do they all do /
I need to know the location of the oxygen sensor 3 in bank 1 on a 2000 Chevy Blazer. Is it the one closest to Cylinder Head or closest to the catalytic converter. email address is wcannon@knology.net
take the old one off
where the map sensor on 98 blazer?
If it had a bad O2 sensor the "check engine" would be illuminated and a code would be set indicating which sensor is at fault. You probably have other problems causing that backfire to occur.
NO.
The 1993 Chevy S 10 Blazer IAT sensor can be found on the top of the transmission. The IAT sensor will be near the front of the transmission.