This part must be obtained from the dealer. A little pricey but if it is leaking you will notice it is worth the money to get it fixed. The PCV assembly is a little more than the little piece you would see at Autozone. It consists of the PCV valve itself and then a long molded plastic piece that comes behind the engine. When looking at the engine the valve itself is on the left side of the block right on the top towards the front. However the tubing goes all the way back and behing the cover and ties in just behind the right side of the engine. It takes a little finesse to get the clip off but patience will have this changed in no time. Good luck... don't forget to put on the plastic gloves first! Davisbound
in what location can I find the pcv valve on my 2002 chevy tahoe
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
the pcv valve is located on top of the valve cover
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
The 2002 Chevrolet PCV valve is located on the outside of the air intake housing. The valve will be on the back of the housing.
I had the same question. Seems it does not have a PCV valve.
does the 2006 silverado have a pcv valve
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.