You hae to take off the front driver side tire. Then remove the plastic shielding inside the fenderwell at the bottom. The belt tentioner is located near the bottom of the engine. Turn the bolt so that the tentioner pulley moves up. Remove the belt. I took out the electric fan for he radiator to give me more room to take the alternator out. Then take out the bolts to the mount. (I found it easier). Take the alternator out of the mount, replace it, then reverse the order.
YES.
how to change an alternator
3000gt Mitsubishi 1992 is jumping out of reverse
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
you loosen the bolts on the opposite sides of it. then, you change the alternater, and tighten the bolts.
locate the alternator take off the belt put new one on then the belt and your done
I Have a 1991 3000gt Sl and the ECU Is located Behind the radio and can accessed by removing the side carpet panals for your gear shifter.
The Alternator is between the engine and the firewall. Follow the serpentine behind the engine and you'll see the alternator. Removing the alternator is easiest if you remove the passenger side front tire and the plastic mud guard. Once they are both off, the alternator is easy to change.
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
Remove the wiring harness from the back of your 1993 VW Jetta alternator. Remove the three alternator retaining bolts. Remove the alternator belt. Reverse the process to install your new alternator.
1991 to 1993 3000gt do not have a crank sensor. Only a cam sensor. And when does go out the car will not start or have a very irregular idle.
check your alternator it might be bad.