battery is behind the front left wheel. You have to remove the wheel to replace the battery. (you can access the battery w/out removing the wheel, but you can't actually get the battery out unless you take the wheel off.)
Once the wheel is off, remove the inner-fender well mud-guard and you will see the battery just forward of the wheel well. From there it's pretty straight forward. Hope this helps!
Scan tool or unhook the battery.
I have a 2002 Sebring Limited Convertible and my battery is located and "accessable" on the driverside front wheel well. To change the battery you need to turn the wheel all the way to the right and remove a cover to expose the battery. Good Luck! it's no easy task!
A 2002 Chrysler Sebring was not built with a cabin filter.
Read the manual.
A 2002 Chrysler Sebring convertible does not have a maf sensor.
No, in 2002 the Chrysler sedan was a Sebring.
change the heather fan sensor
A 2002 Chrysler Sebring sedan does not have a MAF sensor.
All there is to do is to change the fluid and the filter.
Yes, you unplug and unscrew them.
A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.
The 2.7L out of a Chrysler Sebring or Dodge Stratus.The 2.7L out of a Chrysler Sebring or Dodge Stratus.
Idle speed is computer controlled and is not adjustable.
The 2002 Chrysler Sebring OBD 2 port is underneath instrument panel, near steering column
NO, Dodge doesn't have a reset button.
It does not have one.
every 5000 to 8000 Km or every 4 months
You can unhook the battery or use a scan tool.You can unhook the battery or use a scan tool.
You hook the charger to the red and black jump start posts under the hood on the driver side.