First remove keys from ignition, then remove positive battery cable from the battery(Red cable or marked with a + ), then remove the black or negative cable, remove all brackets that secure battery to holder, remove battery and BE VERY VERY CAREFUL NOT TO SPILL ACID ON YOURSELF!!!!!!! ANY SKIN CONTACT OR CLOTHING CONTACT SHOULD BE FLUSHED WITH WATER IMMEDIATELY!!!!!!!), Replace with new battery, reconnect the securement brackets, install black or negative cable, install the red or positive cable. WARNING!!!!!!!...DO NOT LET THE WRENCH CONTACT ANY OTHER METAL ON THE CAR WHILE IT IS BEING USED TO REMOVE THE RED/POSITIVE CABLE.....YOU COULD CAUSE YOURSELF SERIOUS INJURY AND OR BLOW UP THE BATTERY....JUST TAKE YOUR TIME AND USE COMMONSENSE AND CAUTION AND WEAR A PAIR OF SAFETY GLASSES AND GLOVES AND DO NOT HOLD THE BATTERY AGAINST YOURSELF WHILE YOU ARE CARRYING IT. THE BATTERY IS FULL OF SULPHURIC ACID!!!!!)
Remove rear seat and remove battery
Under the rear seat
You can get a wiring diagram for a 1997 Cadillac Seville STS at Wiring4Cars. The site lets you search for diagrams by year, make, and model.
No
you take a car battery charger and out the negative on the antna and positive to the body and turn it 0n
14.2
Under the rear seat
under the hood passenger side
There are a number of oxygen sensors on the 1997 Cadillac STS. These are found on the firewall, inside the exhaust manifold, and behind the catalytic converter depending on the engine model.
I think it's under the rear seat!
Flickering lights, on a Cadillac STS, is usually a sign of a loose wire. When all of the lights flicker, it is an indication of a loose battery ground cable.
MY 95 sts is on the left side quarter panel behind the carpet