Want this question answered?
The belt of a Sears Kenmore Sewing Machine may break. You can replace the old belt with a new one.
I am looking for a belt for the 5185.
Use a socket and ratchet on the bolt that holds the 95 Park Ave serpentine pulley. Pull the ratchet to the side and the pulley will swivel, loosening tension on the belt. Remove the belt, install the new belt in the same manner.
Overloading your Kenmore front load washing machine can cause increased wear on the Belt drive. Over time, the belt may wear out and break.
hw do i replace the belt on aFantom Cyclone Vacuum Cleaner
Something is probably rubbing the belt.
Vacuum cleaner belts are not repaired, but are replaced.
loosen the bolt on the bottom of the alternator.
uhmm.. i would say that it would be the belt in your vacuum. :)
Using a ratchet and socket, put the socket on the bolt holding the idler pulley to the tensioner arm. Pull the ratchet and the whole assembly will swivel over taking tension off of the. The belt can now be removed. Reverse the process to put on new belt. This is easier done with two people.
PSP Black Vertical Leather Case with Swivel Belt Clip from : www.talkietech.com
Assuming you mean an upright vacuum cleaner such as a Hoover, which has a rotating floor brush/carpet beater, the rubber drive belt for that only needs to be replaced when it snaps.Not true, it largely depends on the type of belt your machine uses. Vacuum belts can be ineffective even before they snap. After a period of use they can wear and stretch. If this happens the belt will not be able to turn the brush against the resistance of the carpet and therefore will not pick up debris the way it should. As a good recommendation you should at least change your vacuum's belt yearly, some models require a changing even more frequently.