Take off the cover/panel on the side of the boot next to where the rear lights are. Inside this you will see that the light unit is held in place by a plastic wing nut. Undo this fully. You can then push/pull out the rear light unit although it is held on relatively short wires. There are plastic clips on either side of the light unit and if you release these the cover comes off, leaving the two bulbs exposed. Change bulb, check it works and reverse procedure to finish
how do you change the brake light bulb on a Peugeot 3008 Halfords cant figure out how to get access
In order to change the brake light switch in a Peugeot 307, you must dismantle and access the main light board on the dash and find the connecting switch, thusly flipping it back to the on position.
already changed brake switch but cant shift form P
change the wheel cylinders or the brake lines
where is the fuses for a peugeot 407
the brake light fuse on a peugeot partner is F1O!! STOP SWITCH FUSE!!
You can access the rear brake light from the cargo compartment. Remove the brake light connector. Take hold of the light bulb, push in and turn at the same time, to remove. Reverse the process to install the new brake light bulb.
open the boot, on theapposite side of the brake light there are 2 nuts and bolts. undo them and the light will come off. cut the wire connecting the brake light then use clip or crimp wire connectors to the 2 wires
In the fuse box
The brake light switch must be broken or out of adjustment.
what do you have to do to change the center brake light
probably the brake light switch on the pedal if none are working at all