open your trunk u have to pull down the carpet interor so ull have to remoce the stoper you do this with a screw driver pull the carpet out of the way and you will be able to get to the light twist the locking peace and pull out the bulb and change it out do not touck the new bulb with ur bare hands or it will blow in less than a weak replace the carpet and check that it works if it dosent work check ur fuses
a catalytic converter is a element that heats up with exaust gas flow and burns the remaning fuel present in the exaust gas for emmision porposes(thats a very vauge question)
Melting is the physical change.
Chemical change
Cheimical change
Something that burns or is flammable would be a chemical change.
When sugar burns, it creates a new substance. It's not possible that it's a physical change. So, it's a chemical change !
You need to find the short circuit in the wiring.
No. It is a chemical change.
Chemical change
try replacing the temp sending unit Could be a bad sensor. if you know where it is you can un plug it at the sensor and see if the gage goes to 0, then ground it to the motor and see if it goes full hi. also look for chafe or burns on the wire.probably the sensor.
No. The two circuits are not normally connected.
You have a short to ground in that circuit.