answersLogoWhite
Chevy Suburban

How do you change the button lights on the radio of a 1997 Chevy Suburban?

272829

Top Answer
User Avatar
Wiki User
2013-04-13 15:00:50
2013-04-13 15:00:50
I just did this to my radio. You must remove the radio for the dash. Open the radio to reveal the circuit board and solder new bulbs on the board. I found the bulbs at Radio shack online.
1

Related Questions

User Avatar

Where is the reset button on a 2000 Chevy suburban

User Avatar

How do you change a tire on a 2000 chevy suburban

User Avatar

Where is the thermostat on a 1997 chevy suburban and how do you change it?

User Avatar

That truck DON'T have a reset button. Chevy didn't use them on there trucks.

User Avatar

The breake lights on a 2003 Chevy suburban come on when the car is not being uesed, becausethat is the way thay are made?

User Avatar

On my 99 Suburban, the alarm activates when you press the lock button on the remote twice.

User Avatar

change low beam lite in 1999 suburban

User Avatar

Checrolet does not use inertia/reset switches.

User Avatar

Borrowed from silverado answer: Push the set button and with the set light on, press either the scan or seek buttons to change...

User Avatar

yes they will, i had a tahoe and suburban and they intechange between silverado / sierra as well

User Avatar

If a 1987 Chevy Suburban has lights and horn, but no ignition, gauges, radio, or interior lights it could be a ground wire problem. It is possible that there is a short somewhere. Also check the dome light for a possible water leak in the headliner.

User Avatar

my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.

User Avatar

If you're looking for a fuel pump reset switch, Chevy doesn't have one.

User Avatar

If the reverse lights are not working on a 1999 Chevy Suburban, be sure to check the fuse panel. If all the fuses are in working order, check the wires for any loose connections. Faulty wires can result in little or no light input.

User Avatar

on my suburban (2002) the drl's are activated and deactivated by pressing the "dome override" button in and out twice. with the key in the run position you should hear a chime after the button has been depressed at the 4th time.

User Avatar

A 2004 Chevy suburban should still be under warranty,unless you have custom lights, you can take it to the dealership and have fixed for free.

User Avatar

if you need to ask just take it to midas

User Avatar

how many axles does a 2008 chevy suburban have/


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.