How do you change the cabin air filter on a 2004 Mitsubishi Endeavor?

Answer 1

My 2004 Endeavor has no Cabin Air Filter installed So I Did install one. Following how I did it, sure you can change the air filter.

First pull out the console panel of the CD/ AC controls by slowly but firmly pulling on it backwards (be sure not to break it). This is held only by clips and the electronic socket at the back of the panel.

Then, I detach the string found on the right side of the glove box by pushing it in and threading it out.

Now, I remove all the screws that hold the glove box and remove it.

Behind the glove box is the Blower box. Near on its top most portion, there is a rectangular mark etched on the plastic (this should be the opening for the filter). I removed this by slicing through it using a knife (If you have a cabin air filter installed, you have to remove a cover on this area). Once removed, you can now see the fan inside the fan box. Inserted the filter on top of the fan (making sure which one should be on top) and then made my own rectangular plastic cover to cover the hole that I made and is fixed by tiny screws so I can remove it later to service the filter (can use Duct Tape but it is wiser to put in a sturdier cover). Put back all that I removed in reverse order and Done!... I made sure to push back firmly the center of the CD-AC console to ensure proper contact of the electronics connections. Take a deep breath of clean air and enjoy!