0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where is the Cold start valve Toyota Tercel 1997?
A cloud
Where is the cold start valve on a 1990 vw cabriolet?
Hi the cold start valve is on the left hand side of the inlet manifold and should have a blue connector on it hope this helps..veedub_m1ck
93 Toyota 4-runner will not start in cold weather?
Many possible reasons. Maybe cold start switch(valve) is bad.
Where is the cold start valve 1990 5.0 bronco?
Cold Start Valve. Cold start valve. I do not believe there exists a "cold start valve"
Where is the cold start valve in the 1989 Toyota Cressida?
The cold start injecter is located in the middle of the intake manifold with the brake master cly. right in the way
Why your 940 Volvo will not start cold?
were is locate the cold start valve
1994 Toyota Pickup 2.4L 4x4 no power when accelarated and is missfire?
having a similar problem. have traced it back to a cold start valve and an egr valve. both are clogged on mine.
Valve clearance for 3E Toyota engine IN MM?
How to check valve clearance on 3E Toyota engine
Why does your 1998 Toyota 4Runner shake on cold start up?
because its cold
Is there another name for a cold start valve on a 85 Nissan 300zx?
* A heat riser valve
Where is the cold start valve on Mercedes 190?
Remove the Air cleaner completely and you will see the Cold Start Valve underneath with the wiring plug attached to it. You can instantly recognize this valve from the Allen Key screws that bolt it on to the manifold. John T
Where is the cold start valve how does it work?
millisecondThe cold start valve is sometimes called the fifth injector. It is mounted to the intake air distribution box and is in line with the fuel rail. It has an electrical connection and a fuel inlet line and a fuel outlet line. S The cold start valve is essentially constructed the same as the regular fuel injectors. The main difference is that the cold start valve injection time is measured in seconds rather than in milliseconds like the regular injectors. The cold start valve receives power from the double relay when the key is in the start position but only injects fuel into the intake air distributor when the cold start valve is grounded by the thermo-time switch. The purpose of the cold start valve is to inject fuel into the intake air stream when the engine is cold (and the starter operating) in order to richen the fuel/air mixture for easier starting. It can be tested in the same manner as the other injectors. Leakage is undesirable as it will cause the engine to run rich. sorry no pics millisecondThe cold start valve is sometimes called the fifth injector. It is mounted to the intake air distribution box and is in line with the fuel rail. It has an electrical connection and a fuel inlet line and a fuel outlet line. S The cold start valve is essentially constructed the same as the regular fuel injectors. The main difference is that the cold start valve injection time is measured in seconds rather than in milliseconds like the regular injectors. The cold start valve receives power from the double relay when the key is in the start position but only injects fuel into the intake air distributor when the cold start valve is grounded by the thermo-time switch. The purpose of the cold start valve is to inject fuel into the intake air stream when the engine is cold (and the starter operating) in order to richen the fuel/air mixture for easier starting. It can be tested in the same manner as the other injectors. Leakage is undesirable as it will cause the engine to run rich. sorry no pics
