No "default". The system can remember up to three different settings that include the driver's seat position and exterior/side mirrors, selectable with the memory switch on the driver's side door. Select the third setting by pushing the 1 and 2 buttons simultaneously. These settings also correspond to each one of the three max. remote controls that can be programmed into the system (i.e., the car distinguishes each one). Lincoln only gives you two remotes with the two sets of keys, buy you can purchase a third. To establish a setting, adjust the seat and mirrors as desired, push the Set button on the memory switch (light should go on) and then press the appropiate number button. Select setting #3 by pushing the 1 and 2 buttons simultaneously. Settings are lost and must be redone every time you disconnect the battery. Answer #2 To keep it simple, the remotes when activated are assigned a number i.e. #1 or #2 which ever one you wind up with #1 or #2 will save your personal setting. #1 remote is the #1 setting on the door #2 remote is #2 setting on the door. If you get them mixed up after programming them, say in my case my wife at some point switches remotes with me [ for what ever reason ] the setting follows the remote not the person. So now when I use the remote to open our doors the settings change to the settings my wife set for her remote & visa versa. Either swap the remotes back or reprogram the settings to match the remote you are in possession of. If you only have one remote and the remote turns out to be the #2 remote and you set all the settings and save it to the #1 setting on the door . . . . all your settings will change everytime you use your remote to open the doors. if you only have the #2 remote you must save your settings to the #2 position. drl
SQUEAK = FAULTY STEERING WEEL PUMP ,,,change it .
try to replace the camshaft position sensor located under the power steering resivoir .. on 4.6 liter lincoln ...
How to change default page margins in excel.
The default format for text is left justified.
Try the fuel line that is inder the front side drivers seat It might have a quick disconnect
Gen 1 or 2? With the drivers side you will have to remove the battery and then the nuts to the lights, disconnect the wiring and remove.
to change your default on myspace u go 2 photos and then go 2 a tab that says edit photos. click on the photo that u want as a default and when its enlarged click default picture on the top to use it as a default
Press the 'C' button on your keyboard. This will change your view from being in the drivers position to being in the giant floating orb following the bus view.
How do you change engines on Lincoln Continentals?
It is simply Apple's default ringtone unless you change the default in Settings.
by default you get no avatar but you can change that
To change the default nudes, you must download a mod for that. Just search it up, they have all kinds of mods.