Brake Pads and Rotors
Jeep Wrangler Sport

How do you change the front brake pads of a 2001 Jeep Wrangler Sport?

484950

Top Answer
User Avatar
Wiki User
Answered
2011-09-13 00:21:18
2011-09-13 00:21:18

You will need a tool to wind back the caliper piston or a steering wheel puller will do the job.All the standard stuff choc wheels jack up front remove wheels .Remove the two bolts top and bottom at the back of the caliper remove the caliper remove the outer brake pad use the tool to wind back the piston all the way remove the inner pad and place new pads in replace caliper and bolts pump the brake pedal until hard and replace wheels .

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


what front and rear end are in a 2001 wrangler sport 4.0

if i am correct the wrangler sport has a Dana 30 front and a Dana 44 rear.

How do you change front brake hose on a 1997 lincoln

The only factory front axle that came in a 2001 Jeep Wrangler is a D30.

Unless the caliper is broken, you can just replace the brake pads.

how to change front brake pads on a 2003 neon

Change front brake rotors on a 1998 Hyundai Accent?

The front speakers in a 1997 Jeep TJ are 4"x6"

how to change front brake pads on a 1994 lexus es300

How to Install Front Brake Pads Check Related links below.

how do you change the front brake rotor on a 2001 highlander?

Can someone help me with the same promble.. how do you change the front brake pads and what tools do you need to do the job

How do you change the front and rear brake pads on a 2000 Honda Civic Si?

How do I change the front break pads on a vauxhall Astra

how do you change front brake pads on a 2001 kia optima

How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra?

http://www.justanswer.com/questions/24dnv-change-front-brake-pads-renault

AnswerA sport model should have DANA 30 front axles and DANA 35 rear axles A DANA 44 axle could be ordered optional on the rear.

how do i change front brake pads on my 2002 polaris 500 sportsman

Change the brake pads sensors. You must change them after every brake pad swap.

How do you change the front brake pads on a Ford E-250 van? cannot remove the pads from assembly.

You can change the brake pads by first removing the wheel. Remove the brake and retaining springs. Reverse the process to install the new brake pads.

Over 20 mph, front brake then add back brake. Under 20mph a little front but mostly back brake. Under 5 mph back brake only. In an emergency front brake hard and add back brake hard. Change down after braking, even if you brake to a standstill.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.