you haft to remove the bumper first to get to the bolts holding
in the lights
What's the question? Yes, a peugeot 106 has dashboard lights.
How do you change a shock on a Peugeot 106 gti
changing speedo cable pergeot 106
If the bulbs are working then you just need to change te fuse.
how do you take clips off
timing belt changes are every 70k on 106 d
Get a manual on your car from AUTOBOOKSONLINE.COM or DISCOUNTAUTOREPAIRMANUALS.COM
go to a garage and pay through the nose.
The features that come standard on the Peugeot 106 include a single point injection fuel system, front wheel drive, front disc brakes, and rear drum brakes. The car was known for having very little in the way of standard features.
32 PSI front and rear, whatever the load.
Hey, Im pretty sure it's 5 inch for the front. Rodney :)
No the Peugeot 106 is not considered vintage. This is true because the Peugeot 106 was made in the year 1991. To be a vintage car you have to be around for more the 20 years
It would seem that the switch has broken, the switch is located above the pedal, it is easy to replace.
Should fit pretty much as is, might need to change / up grade mounting bushes/components. don't forget the ecu's tho....
You might check to see if your front headlight bulbs are out.
Drain coolant. Refill with correct water anti freeze mix
Every 5 years or 60,000 miles which ever comes first.
Yes, as long as your wheels are 4 stud. Some peugeot 106 models are 3 stud.
Peugeot 106 cars are no longer manufactured. If you want to buy one, you must buy it second hand. However, the Peugeot 106 was originally manufactured in France. They were also manufactured in Tunisia.
the brake light fuse on a peugeot partner is F1O!! STOP SWITCH FUSE!!
Peugeot 106 workshop manual.
front of engine next to gear box i just looked and i cant see it is it underneath the engine ?
i have a peugeot 106 zest 3 1.5 s reg probulem with rear door not closing propely
The 106 GTI Peugeot vehicle was in production from 1996-1999 as a French vehicle. The original Peugeot vehicle was first introduced in the fall of 1991.
Its In the washer bottle which is located inside the front wing. remove wheel and wheelarch liner to gain access to it.
hi i have a pug 106 independance an the power steering pump is located just behind the front bumper on the passengers side
It should tell you the p.s.i. on the tyre? but my 1 litre 106 xn has 13" wheels and holds 30 p.s.i. in the back and front tyres.
Probably because those are warning lights and your car is neither low on oil nor overheating. Alternately check bulbs and fuses.
The Peugeot 106 was introduced on September 12, 1991 and was produced through the year 2004. It was produced in France and considered a 'supermini' in class.
The Peugeot 106 "Quicksilver" model was first introduced in 1991. There were several 106 models on offer at the time but in 1998, the range was reduced but the Quicksilver model remained in production.
it depends what oil filter it uses. canister of catridge type> generally it would be done with a service
A Peugeot 106 car is a car that is made in France. Peugeot was the name of the man who made this car. It is a small car. It is even smaller than a small family car. It was made from 1991 to 1994.
The Peugeot 106 is actually a French produced care made in 1991 but automaker, Peugeot. It is still being manufactured today in many parts of Europe is considered a very common car.
To adjust your headlights on a Peugeot 106, you need to find the screws to covers the headlights. Look on the chrome that covers the headlights, and if not there, check under the rim.
The ignition module for a peugeot 106 is in the engine compartment. Facing the car with the hood open, the ECU is behind the headlamp nearest your left hand.
i have seen pug on a saxo so i think if u mod the lights on the mk2 saxo bonnet it will fit :)
yes if you change the slam panal front wings headlights and the bonnet lol
One can purchase Peugeot 106 alloy wheels at their local Peugeot dealership. These wheels can also be found at auto parts retailers such as Auto Zone and NAPA Auto Parts.
The fog light switch on my peugeot 106 is next too the hazard warning switch and the rear window heater switch below the stereo.
change the wheel cylinders or the brake lines
Im no certain but in my 106 it is behind the glove box
106 immobiliser can be reset by turning on the ignition, and leaving it on for about 30 minutes
depends.... ABS AIRBAG OIL LEVEL OIL TEMP WATER LEVEL WATER TEMP WATER IN DIESEL ECU FAULT depends on car model
how do you bleed a diesel peugeot cooling system
You should be able to but you will need new mounts and some links.
On the peugeot 106 there is an oil cap on the top of the engine, note don't forget to check the level after you have put some in otherwise you could over fill it. HKP
Yes, though they arent imediately obvious as they are hidden by a red tint. Turn on ignition so the dash lights up, but dont start the engine, put the gearstick in reverse and walk round back of the car. voila.
im sorry to say but the peugeot 106 pump always goes on the car it can be easily be fixed! go to a scrap yard and you can get the pump for £90 goodluck
The best place to purchase a Peugeot 106 exhaust system is from your local mechanic. If that is not an option, eBay Motors is always a great option for car parts.
On a 1994 Peugeot (not sure if later models are the same), open the bonnet and at the back of the headlight casing will be a round shaped rubber fixing for the bulb. Turn to the right (could be left!) and the bulb and holder should come out. Change bulb over and replace.