You have to remove the wheel hub and remove the c clip in the hub that secures the bearing. You can have the bearing/races pressed out or you can use a slide hammer to remove them. You will need to take care when installing new races that you don't scratch or nick them by using old races over the top of the new ones to drive them in with a hammer. You may just want to remove the hub and take to a shop and have them do it for you if you don't have the tools.
The starter on a 1991 Toyota Tercel is located in the front of the engine. It will be located on the left side.
The timing marks on a 1991 Toyota Tercel are on the crank pulley. They are located on the front of the pulley and under the cam.
front are 6.5" and the back are 4x6"
Yes, drums on the rear, discs on the front.
can you grease the front wheel bearing s on a 2001 toyota corrolla without removing them. Is there a external greaese fitting.
how do i change front wheel bearing of kia sorento 2003
How do you change a 1998 jimmy 4X4 front wheel bearing ?
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
I went on Ebay and found a tool that does the job in 15 minutes. It's listed under Rear Axle Bearing Puller Tool-09521-25011 Toyota Trucks.
The recommended tire pressure for the front and rear tires on a 1996 Tercel are 32 psi. In metric units it is 221 KPa.
how do you change wheel bearing on 98 mercury mountaineer
Change wheel bearing on 2006 mercury mariner