Want this question answered?
A shotgun, a strong crowbar and a lot of upper body muscle.
Go to a wrecker and get a used lock from there.
with a barrel lock key
Push the spring and pull the cylinder out
i need to see a pic of your problem before answering
how do i change locks on lt35 due to key snapped in barrell
Pay your bills and it will never have a barrel put on it!
To replace lock cylinder in the hatch ,first inside hatch panel must be removed. After removing the panel you will have access to the lock cylinder. Remove the linkage to the cylinder and pull the retaining clip from the cylinder and the lock can be removed from the outside of the latch. This is not a hard job to do , 1 hour max if your slow .
I assume you are referring to the lock barrel... Remove the inside trim panel from the door Reach inside the door and find the back of the door lock barrel, you will feel a metal clip on the opposite side of the barrel to the edge of the door (ie. on the windscreen side of the lock). Simply pull the clip towards the windscreen until it comes off (you will have to pull fairly hard), then you can withdraw the lock from the outside of the car. To put it back, slip the lock back through the door from outside, then slide the spring clip back to hold the barrel in place.
Check the Odyssey door lock carefully. You will need to look for anything worn or bent to see what the problem is. After you see the part that is causing the lock to malfunction then you can adjust or change the part.
prise the panel off from the boot lid,all then is accesable,could you please tell me where you bought a replacement lock barrel?cant find one anywhere e=mail pabb_c@hotmail.com
The linkage is not connected to the door lock barrel. You will need to remove the inside door panel. Connect the linkage to the door lock barrel.