I have a 2000 and I had to take 3 nuts off the back of the head light and 1 off the top.Then the head light comes out the front and you remove the bulb.This is for the low beam bulb.The high beam bulb can be removed without removing the nuts.Hope this helps some and good luck
A 1998 Chrysler Town and Country would have a 3.8L V6. That engine has a timing chain not a belt.A 1998 Chrysler Town and Country would have a 3.8L V6. That engine has a timing chain not a belt.
A 1998 Chrysler Town and Country does not have a cabin filter.
There is no such thing as a 1998 Chrysler Fifth Avenue
I'm trying to change the headlamp and I'm having difficulty myself too! Very good question!
There is no such thing as a 1998 Chrysler Fifth Avenue
The wiper switch on a 1998 Chrysler Town and Country gets power from and is an input to the body computer.
A 1998 Chrysler Town and Country uses DOT 3 brake fluid.
The spare tire on a 1998 Chrysler Town and Country is mounted under the very rear of the van.
97 Chrysler town & country evaporator bolts location for removal
Filter change, about 5 quarts Dry fill, about 9 quarts.
Replace it.
No, all of the sensor plugs are different.