Drain coolant and disconnect hoses at firewall.Loosen clamp at firewall.Remove screws around glovebox and remove door.Remove panel on right side against floor.Loosen up dash support right side.Remove cover at core.Cock core out of box with twisting motion. Install new core carefully.May need some one to help guide through firewall.Make sure you do not break solder between tubes at firewall.(I did the first one and it leaked in 5 months)Install new hoses and hose grease and install clamp.If clamp pulls on core then leave it off..Fill with coolant.
Disassemble the dash and open up the HVAC compartment.
No it will not
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
Im asking how to change the heater core. I don't have the answer.
Need to know what year and model the truck is. 1992 Chevy k2500
I have a very big sausage
You take it to a AutoTech.
$52- $208 roughly. depends on if the heater core is bad.
you dont, a mechanic does
on 92 s10 4.3l one of the hoses goes to the top rear of engine and is really tough to get to
there is no alternator on the 1992 Lumina its all electric, so there is no need for one.
you most likely need to change them