Want this question answered?
Hold the Scan/RPT button down then press the 4 to change the hour or 5 to change the minute.
Yuo hold down the clock button and press up on tune to change minutes and down to change hours
down the dipstick tube
remove the two nuts holding down the battery harness inside the fuse/relay center, then you can pull it out.
hold down the clock button and push tune + or - to change hours and search + or - to change minutes
How to change Mazda 3 Clock settings To set the hour: 1) Put ignition in ACC or ON position 2) Press and hold "CLOCK" until beep sounds and "12 hr/24 hr" is displayed; 3) Press "SET" to select 12 or 24 hours (24 hours is military time) 4) Press "CLOCK" again while the selection is flashing "Hr ADJUST" 5) Press "SET" to select hour 6) Press "CLOCK" when done Do the same to set minutes, but select Minutes in step 4
First thing that needs done in order to change the clock on a 2006 Acura RL is pulling down the flap. After that the hour button will need held down in order to change the hour on the clock. Lastly you will need to do the same for the minuet.
I found this out through trial and error. Hold the "clock" button down until it starts blinking. Use the "Tune Seek Track" button up for hours, down for minutes to set the clock. Hit the "clock" button again to save the setting.
On my 97 E250 I change the digital clock by pushing and holding the clock button in, then change the hour up or down with the search arrows on radio, and the minutes with the scan arrows .
You need to turn off the radio and then turn it back on while holding down the clock button from there use the up and down buttons to change hour then press clock again and use the up and down buttons to change the minutes then turn off the radio. When you turn the radio on again the clock should be working
You need to turn off the radio and then turn it back on while holding down the clock button from there use the up and down buttons to change hour then press clock again and use the up and down buttons to change the minutes then turn off the radio. When you turn the radio on again the clock should be working
Turn the radio on. Holding down the 'clock' button and use '' (forward) to set minute.