1. Remove the lining on the side by removing the plastic pins.
2. Use a flat head screw driver to slide underneath the pin tops to pry out.
3. One pin near the trunk opening covers a fixed screw and needs to be pulled off.
4. After removing the side lining in the trunk, you can access the rear lights.
5. Twist the plastic housing and pull out the bulb.
6. Insert new bulb.
7. Be patient when reinstalling the lining.
There is a new system called sts turbos, they are turbos (single,twin) mounted in the rear of any vehicle! I have a white crossfire and i am waiting on someone to put this system on a crossfire. Its pretty sweet! I think you can get a universal rear mounted twin turbo for under 3 grand. Just google sts turbos.
You need the near pair of the rear lights and a screwdriver to unscrew the screws if you want to change the rear lights on a Peugeot 607.
It does not have a rear air filter.
because there is a fault in the circuit
Please, where is fuse box for rear brake´s lights in Chrysler Gran Voyager MY 2003 ? Thanks
yes but you will have to change the complete rear panel.
The screws that hold the rear lights in place on a focus are inside behind the rear pillar trim
What are front rear running lights? If you look under the hood on the left side of the engine compartment there is a big long black box with all of your fuses and relays.
it would be the brake light switch about 20 dollars at autozone
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
You can change the rear lights in your 2009 Ford Fiesta by removing the interior panels behind the tail lights. Push the light clip and turn it. the light will pull out to be replaced.
The exhaust, rear drive shaft, and fuel tank have to be removed.