Electric Windows
Chevy Suburban
Mercury Grand Marquis

How do you change the regulators and window motors on a 1998 Mercury Grand Marquis?


Top Answer
User Avatar
Wiki User
2010-08-15 11:21:12
2010-08-15 11:21:12

window regulators on a MGM are a time consuming task.

you need to remove inside door panel,witch has a few hidden fasteners installed.

behind door handle,inside courtesy lamps and also in arm rests.

once the panel is removed you must detach the door glass from the regulators regulator will come with the motor attached-to it.

some regulators are riveted to the door frame.

you will have to drill rivet heads and replace with bolt and nuts on assembly.

remove motor from regulator and reassemble.


Related Questions

User Avatar

The motors were installed with rivets at the factory. You need to use a drill and drill out the rivets to remove the motor. The replacement motors come with screws and bolts to replace the rivets.

User Avatar

In their pickups and cars, not since 1972.

User Avatar

if you are asking what controls the speed at which your power window opens and closes, there is no 'controler' the speed is slowed down by factors like: out of adjusted windows, bent regulators, badly worn regulators, worn out motors or hot motors. on most older cars the drivers window is slower than the passangers window for resaons stated above. Hondas are famous for bent regulators and poorly adjusted regulators. hope this helps.

User Avatar

Not enough information. Which actuator motors are you talking about, and what about them?

User Avatar

Most electric motors change electrical energy into rotational mechanical energy. A few electric motors change electrical energy into linear mechanical energy.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.