# Step 1 Identify which belts need to be replaced. If you are replacing the air conditioner belt, you may need to remove the alternator belt because of the way the belts are shared on the crankshaft pulley. As a result, some mechanics recommend replacing both belts together. # Step 2 Loosen the lock bolt for the belt you are replacing using owner's documentation. The lock bolt will be near the belt tensioner component. # Step 3 Turn the adjustment bolt to change tension on the belt. When the belt is loose enough, slip it off. # Step 4 Use your memory or a belt routing diagram to install the new belt on all pulleys. # Step 5 Adjust the adjustment bolt to replace tension on the belt. Tighten the lock bolt. # Step 6 Make sure the belt is correctly seated on all pulleys and that the ribs fit into grooves on the pulleys. # Step 7 Run the engine and check for any flapping or looseness that could indicate incorrect installation. (eHow.com)
go to local library they have chilton and haynes repair books
3.3L it is serpentine belt driven.
Closest to serpentine belt
The 3.3 it runs off of the serpentine belt. The 3.5 it runs off of the timing belt.
3.3L, it is external and driven by the serpentine belt. 3.5L it is internal and driven by the timing belt.
All you have to do is loosen the idler pulley and the belt is a snap after you do that. just tightin bolt after the belt is on. good to go
I am looking for the diagram for the serpentine belt for a 2006 Dodge Ram quad cab.
about... well cost of a replacing timing belt is about... £88.93
Its 15mm on my '97
what is the diagram of a serpentine belt for a dodge shadow 1994
The 3.5 litre V6 engine in a 2004 Dodge Intrepid has a timing BELT
serpentine belt routing diagram for 1994 dodge spirit