answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you change the side markers lights for the Xterra?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do the amber side marker lights on an automobile need to be changed to export the automobile to Europe?

No the side markers are optional in Europe but the parking lights are normally different.


How to change the side markers lights in a 1997 GMC Suburban?

The marker can be replaced from the inside only, by raising the hood, then removing the two retainer nuts with a 13mm wrench


How do you change the side marker lights on a 1993 Geo Tracker?

just use a flat screw driver or anything thin ...slowly push the screw driver into the (front or behind) the cover of the side markers...... "front" side markers should be pushed backward ....."rear" side markers should be pushed forward...very slowly and they will pop up.. there are no screws..they just pop up .then u easily can access the small light bulb..


88 Chevy caprice you turn on headlights and the front runnig lights don't work take out the running light bulbs and the side marker lights come on?

You probably have a rusted or disconnected ground wire to the running lights and side markers.


1984 jag xj6 yellow dash light circle with small square and x through it when you turn on lights then goes out what does it mean?

one of your lights or side markers are burnt out


Where are the taillights fuses for a Nissan Xterra?

There is a fuse box under the hood (passenger side). I know the the fuses for the head lights are there. The fuse for the taillights is there and is labeled. This fuse includes the running lights but is not labeled as such.


The rear lights side markers and license plate lights are not working on a 1985 Oldsmobile Cutlass Supreme the fuse is good?

Possibly a bad ground in the rear wiring harness somewhere.


How do you change the bumper lights on a 1998 jetta?

well, it all depends on what bumper lights you're trying to change. say for example the side markers, you just pop them out, unplug, plug in new ones and pop them back in. the front left/right signals, the same way. pop out, unplug, plug in new ones, pop back in. fog lights are a different story. you got some wiring to do.


What equipment is requires to be on a trailer?

Lights, and safety chains. Depending on the size of the trailer, additional markers / side lights / etc. may be required. Most states require licensing, it may be in the form of a license plate, or a permanent registration. Your local DMV should have all the guidelines for you.


Why is it that the lights on the left side of your car and your dash lights quit?

you probably need to change your fuses you probably need to change your fuses


How do you change light bulbs on a vw golf?

Front side lights


What is the firing order for a 2006 Nissan Xterra?

2006 XTERRA 4.0 litre non turbo drivers side 1,3,5 pass side 2,4,6