no ya goose, what are your eyes painted on, do you know where the plug is!
yes, you can.it's simple, all you have to do is just change it without removing the tank because there is more space available under the tank from the engine
You cant chance the spark plugs with out removing the manifold sorry dude i have tried every possible way there is and its not going to happen :(
Only if it's bad. Be careful when removing..
You can change your spark plugs by locating the old ones and removing them. You can insert the new ones by locating the spark plug hole and then threading them in. It is easier if you use a socket wrench to install them.
The spark plugs in a Honda VTX 1300 can be removed by first removing the spark plug wire. Twist the spark plug out, using a spark plug socket. Reverse the process to install the new spark plug.
You gotta go from underneath the truck between the frame and the engine and its good to have a friend with long skinny arms to do this.
No. However, newer plug wires can be extremely difficult to remove without damaging them.
The spark plugs on a Fiat Punto are changed by removing the spark plug wire cover and pulling firmly on the plug wires. A deep wall socket can then be used to remove and replace each spark plug.
The spark plugs on a Chrysler 300 are changed by removing the plenum assembly, pulling the plug boots, and removing each plug using a deep wall socket. The gap of each new plug is set and installed into the heads.
No, the plugs can be accessed from underneath or by removing the upper intake.
YOU CAN REMOVE THE SPARK PLUGS WITHOUT REMOVING ANYTHING EXCEPT THE SPARK PLUG WIRES IN THE REAR USE A SWIVAL AND EXTENSION AND WORK ON BOTH SIDE AND THE MIDDLE OF THE PLETNIUM THE FRONT SPARK PLUGS NEED JUST TO REMOVE THE THREE COILS
Begin by removing the spark plug wire from the top of your 2003 VW spark plug. Remove the spark plug with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install your new spark plugs.