Want this question answered?
Misfires are commonly a result of bad spark plugs or the wires connecting to your spark plugs, There is a spark plug for each cylinder of your vehicle which affects your cars ability to start and shift up in gears, depending on which plugs aren't working.
Try to use the Hyundai Tiburon speaker adapters plugs so you don't need to cut wires and mess up the electric system, you can get those from eBay or amazon.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
You have to unbolt the intake and a few other things and move it up to gain enough clearance to remove wires and plug. It took about an hour or so for my first time.
you simply remove the old ones and you install the new ones. they are on the engine. there is a plastic panel on the top of the engine (it says Hyundai). It has 4 wires going into it on the right. Unscrew the 5 bolts. You will see the 4 wires go to little suction cup looking things. the suction cup looking things pull out, but pull on the suction cup looking thing, not the wire. there is one spark plug at the bottom of each. get the correct wrench (ask your auto parts store) with an extension. take the old spark plugs out and screw the new ones in.
Under the cover where the spark plug wires go into on top of the engine.
on top of the motor under the plastic cover. they are the green plastic things with wires on them.
Are you referring to spark plug wires
Change the spark plugs and wires... Change the spark plugs and wires...
Alphabetical
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
No. However, newer plug wires can be extremely difficult to remove without damaging them.