Remove the 4 allenhead bolts from the v-6 3000 emblem in center of the valve cover. Lift off { Tshapped v-6} 3000 emblem. Remove spark coils located beneath. Remove plugs under spark coils. As far as I know you must replace coils and wires together. However you can replace just the plugs.
There is no plug wires on a J30, you just unbolt the coil pack that's on top of the spark plugs and then change your plugs, after your finnished changeing the plugs you just reinstall all the coil packs on top of the spark plugs, but becarefull you don't break any of your coil packs, they will cost you.
Change the spark plugs and wires... Change the spark plugs and wires...
Spark plugs and wires
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
No you do not need to replace any plugs at all when replacing wires.
we need help! how do you change spark plugs and wires on a 2001 toyta camery
Spark plugs and wires
how do you change spark plugs and wires on 2002 land rover discovery
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Toss out the old spark plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
Yes.
remove the spark plug wires one at a time and unscrew the plugs
No. However, newer plug wires can be extremely difficult to remove without damaging them.