Want this question answered?
To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.
There isn't a speedometer cable. There is a speedometer sensor,where it is located I am still trying to find out. On the tranny or in the speedometer or somewhere else?
IF THE CABLE IS DAMAGED, THE HOUSING IS DAMAGED. ITS A COMMON PROBLEM. REPLACE WITH NEW PARTS
how do you change the speedo cable on a 99 goldwing 1500, and how do you lube the front end/ I need instructions, not parts
No, it uses a cable.
There is no speedometer cable on a 1990 Chrysler New Yorker. The speedometer is electically driven by a speed sensor mounted on the transmission. often the contacts are just corroded and some electrical cleaner will fix it right up. Other times the sender will have to be replaced. They are available from major Auto Parts stores like NAPA, or from the dealer.
Check the side around the tailshaft.
The 240sx does not use a speedometer cable. It is electronic. The VSS (vehicle speed sensor) is located on the transmission. It sends pulses.AnswerI removed my entire guage cluster and never saw a cable, it was all electronic. not sure if that's where the cable would be, but that's what i found, just three plugs coming out of the cluster.
It uses the VSS signal.
If the speedometer breaks, it effects the odometer. Check the speedometer cable it may be broken, even under the insulation.
You can get a speedometer cable for your 1990 Toyota pickup truck at most auto-parts stores. Many Toyota dealerships have auto part departments open to the public.
Start by removing the gauge cluster, unhook the speedometer cable from back of cluster. Pull speedo cable thru the firewall, follow it down to the transmission, and then unhook it. Install in reverse order of removal.