How do you change the speedometer cable on a 1992 Toyota Paseo?

Answer 1

Nah! 1) Remove the air cleaner and housing. 2) You'll see a cable coming from the transmission housing going to the cluster area. You'll notice that there is a circular looking screw about 3 inches from the tranny housing. Unscrew that. 3) From there, simply pull the cable out. JEEZ! ok, Firstly - Unscrew the gauge assembly on the dash (2 screws above the gauges and it should ease out with the hazard switch - which u just unplug) (- i took my steering wheel off to make it easier to get it out -) on the back of the guages there a black cable which just un clips) Secondly - you will have to pass the speedo cable through the firewall - fun is not the term used - i found it easier to unscrew the lower side of the drivers side dash in order to to this Thirdly - the speedo cable screws into the engine at the back right hand side under the air intake, it is a much larger plug that wat was on the back of the dash --- to put the new speedo cable in - do the same in reverse --- GOODLUCK - AND HAPPY CURSING