Open your trunk. Where the plastic meets the cloth liner of the trunk by the lights, there is a single plastic button-bolt (I can't think of the actual name). Anyway, if you pull on the plastic cover that the bolt is holding in place, it will pop out. Then just peel back the cloth liner and you have full access to the light assembly. It's just a simple turn and you have it out.
how do you change tail light cover on a 1994 ford ranger
Replace the whole light assembly Their are no bulbs it is neon light
Sedan or hatch makes a difference
Hey Jesse==You have to take the tail light completely off. The bulbs go in from the back Good Luck Joe
Raise the back hatch there is two screws that hold the tail light on (2002 ford explorer) remove the tail light and twist out bulb housing , pull release clips and remove bulb. Install bulb in reverse.
how to change tail light bulb on Toyota sequoia
How do you change the tail light on a 2001 toyota sequoia
Yes, these tail lights are interchangeable.
Open the liftgate and remove the ( 2 ) screws at the top of the tail light Carefully work the tail light straight back towards you because it's held in place by plastic pins >>>>>>>>>> and you don't want to break any of those
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
The Tail light assembly is mounted by two Philips head screws located near the boot rubber, take them out and slide the tail light assembly away from the center of the car. Then Bob's your Auntie.
You can change the rear lights in your 2009 Ford Fiesta by removing the interior panels behind the tail lights. Push the light clip and turn it. the light will pull out to be replaced.