Located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator
Remove this housing
Note how thermostat is installed
Clean both surfaces
Replace thermostat and gasket
Replace housing
Re-fill coolant slowly to prevent an air lock
Start engine and look for leaks
Run engine to normal operating temperature with heater on
Re-check coolant level
How do you change the thermostat in 1999 Mercury Villager
There is no change transmission lamp.
1999 mercury tracer fuse panel diagram
A 1999 Mercury Tracer is a front wheel drive vehicle
Remove the water supply hose from the top of your 2000 Mercury Villager thermostat housing. Remove the thermostat housing retaining bolts. The old thermostat will simply lifts out. Drop in the new thermostat and reverse the process.
by licking it until you drop eggs
On my 1999 Mercury Tracer, the fuel filter is mounted on the firewall. It's on the driver-side, on the passenger-side of the brake cylinder. I don't know how to get my hands in to change it though. Jonathon
list is 203.67 and 8 tenths of a hour to change
Mercury made the tracer, not Chevy
The 1999 Mercury Tracer was the last model year in North America ( according to one of Fords websites , .054 inch is the spark plug gap on the 1999 Mercury Tracer )
For a 1999 Mercury Tracer : In the passenger compartment fuse panel The panel is labelled " CIGAR " and will be a 20 amp fuse
Purchase a Hanes Auto Repair manual for the 1999 Mercury Tracer