The stat is located under the plenums to get to it they have to be removed front top and back plenum. Once these are off then the coolant has to be drained via the bottome right rad hose. Also the centre bit that the injectors go into has to be undone this does't have to be removed fully but just shifted tot he left a bit to enable you to get the stat housing out. The metal pipe that the left top rad hose connects to has to pull out of the housing towards you. Easier to do this with the left rad pipe totally removed. Once the metal tube is out of the stat housing that the stat can be lifted up and out. stat replace then put it all back together. Sounds hard I know but if you do it you will se what I mean and although it takes time you shouldn't have any real probs.
Also be carfull of the dipstick pipe when remove the metal tube dont bend it to much or you will end up with a cink in the pipe.
The primary disadvantage of X25 is slow speeds.
XOX could mean Hugs and Kisses or X25 over X25 or Xml Object Xml
x25
PAD
it is used for transaction today.
lunn thai ..:p
three
This information may be found from the link below
tcp/ip is good....
The average price for a cartridge of Canon X25 toner is around $80. There are people selling it for as little as $15 and for as much as $135 but both of these are extremes.
275 square feet
2,050.........82.......x25======.......410......164======......2050