You didn't give us the year of the vehicle so in general... Mitsubishi Outlander center high mount stop (third 3rd brake light) light bulb lamp replacement procedure: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
I had the same problem on my 2005 Outlander. Oil pressure light turned on erratically when the motor was hot and I was on idle. Mitsubishi repaired it on guarantee, the oil pressure switch was defective, they changed it. JJ
The parking brake light stay lit on the 1999 Mitsubishi Montero sport the parking brake is working and you have not put the light off.
there are plastic covers over them on the inside of the trunk that you pop off
I have a 2003 Outlander and tail light is similar- check out the WikiAnswer for the 2003 which helped me remove my tail light assembly.
what do you have to do to change the center brake light
I just had to change mine yesterday 4/12/08 you have to open your trunk, look right under where the 3rd brake light is to find wire running to it, twist to pop it out. Hope this helps. B.C.
Warning light? Check fluid level in master cylinder Make sure parking brake is fully released 2004 mit. outlander
Look at page 3-175 of your owners manual. It tells you there.
WHICH brake light?
Open the turn there is a little hatch take it off twist the light out and pull the bulb put the new one in simple.
either you have a blown bulb, low brake fluid or you need new brake pads
how to change a brake light on 2002 Nissan altima