Want this question answered?
with great difficulty if its a diesel
To change out a water pump in a Series 60 Detroit diesel, you need to locate the water pump in the engine. You need the right tools to remove all the fittings and take the pump out, them replace it with a new one. The owners manual has a list of all engine parts and diagrams.
Remove the belt from your diesel pump. Remove the diesel pump fuel lines. Remove the diesel pump retaining bolts. Reverse the process to install your new diesel pump.
no.
if this is a diesel, it is the easiest water pump to change remove serpentine belt remove water pump. install new pump reinstall serpentine belt pump is on front of engine just left of fan as you stand in front and look at engine
Answergasoline or diesel engine? Gas V10You have to drop the fuel tank out of the vehicle to change the fuel pump. It is located in the fuel tank
hello
This is a complex operation that you should have a manual for.
the water pump is part of the timing belt or chain. you have to take the belt or chain off to change the water pump. if you change the water pump, change the belt too.
Fuel pump
we have to bypass the hose in between radiator inlet and water pump with a small bowl
to change water pump.you first remove serpentine belt. then disconnect bottom radiator hose,this will dump the coolant.next remove top radiator hose. remove fan from water pump. this usually requires 2 special wrenches using an 8 mm socket, remove bolts from water pump lift water pump from engine installation is opposite to removal.make sure to clean gasket surfaces properly before replacing with new pump