Want this question answered?
No, they are not the same. The body style changed in 1992.
either your window regulator or window motor have gone bad and have to be replaced.
Window regulator is probably shot are they power or manual windows
Have to remove the door panel screws, then remove speaker, drop the cables off the window motor (maybe), drill out the rivets that secure the regulator at bottom and remove two bolts at the top of regulator. push window all way up remove glass from regulator, I used a screwdriver but am sure there must be an easier way to remove the caulk that hold window to regulator. then dats about it..if you need to replace motor same thing drill out the rivets and pull out from right side of door...have fun that project sucked for me..LOL
It is called a window Regulator go on line and you will find a picture of it. I have replaced 3 on mine.
Check out this web site www.cflwindowregulators.comthey can help you.
Replace the regulator (most likely problem). Make sure you check the small plastic gear that moves to push the window up or even with a egulator change the window will go up crooked.
It could be the window regulator. If it is worn out and binding, it could cause the window to move slowly, jerkily, or not at all.
It's an internal regulator inside the alternator. So if you want to change it, you'll need a new alternator.
2 things the new motor is faulty or is a binding regulator
My regulators have finally gone bad after all these years and replacing them myself is more important to me at the time.
The voltage regulator is located in the alternator