2000 Lexus RX300 headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You have to cange the whole light.
You have to take the whole light out, there is two screws to take out, then the light will pull out. Then change the bulb. Greeny
Replace the whole light assembly Their are no bulbs it is neon light
You can not just change the bulb. You need the whole clock
hi you unscrew the whole of the light 2/3 with x screwdriver from the outside.
Change the whole headlamp bulb. Should be a H4.
undo the 2 plastic screws at the back of the light the whole light unit comes off then.
You are going to need to take the whole mount out just to get the pressed in bushing out of the mount. ounce the whole mount is off of the car you will need to use a press to get the bushing out. Lexus will sell you the whole mount with bushing installed for about $134.00. LEXUS PART # 12380.
To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.
The bulbs go in from the rear. You may have to remove the light asy, by removing the top plastic rivet and sliding the whole assembly toward the front to disengage the three plastic assembly tabs.
Secret flap in wheel arch under the mud and stuff.
all you have to do is unbolt the whole fog light from it sides and undo the 4 screws on the back. the blub is a H3-55w