Want this question answered?
On a manual transmission the bushing is located below the top cover of the transmission. remove the shifter boot and unbolt the 3-4 bolts that hold the shifter down.only available from your local dealer.
You will need to remove the boot and such to get to the base of the shifter. I have a 1990 and I had to remove 3 star bolts/screws on the base of the shifter. Once removed, the lever assembly pulled right out.
I have a 1992 Ford ranger with a manual transmission. A while back, my truck's shifter knob just came loose.It's all plastic, and I think it was just held on by pressure. I don't know what type your truck's shifter knob would be, since I really haven't driven any newer rangers.
Remove the Ford Ranger automatic transmission drain plug. The drain plug is in the bottom of the transmission. Allow the oil to drain out and replace the plug. Fill the transmission with new transmission fluid.
I am trying to change the oil transmission on my ford ranger 1998 but I do not know what kind of oil it needs. it's a 4 cylender
The part is called the Gearshift Selector Bushing.
The best thing to do is to take it to a repair shop that has a transmission flushing machine. That will change all of the fluid in the system.
shifter is broke. my ranger was the same way. take the shifter off , and the ear on the other end will be broke. simple to fix. jus find another shifter like i did.
Remove carpet/floor covering Then there should be screws holding the rubber boot covering the shifter Remove screws to remove boot Shifter should be secured to transmission by bolts after removal shifter should be able to be lifted from transmission Then you can possibly see problem. Perhaps fork has just slipped from shifter
any shop with aldata,if they will print it out for you!! or you can go to aldata.com and get a subscription for your vehicle
Everything that you have will work. The Mazda is the same as the Ford, all the parts are the same.
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?