where can i attach the negative of my cable to jumpstart my battery for 1997 Montana van.
Attach the negative cable to any bare metal within the engine itself, be sure to keep the cable clear of any belts or moving parts. There is a bolt in the middle of the engine that I used last week to perform the task.
how do you change a battery on a 2002 Pontiac Montana
For a Pontiac Montana the battery is a group 78. Follow this link for dimensions.http://www.rtpnet.org/teaa/bcigroup.html
The battery on a 2005 Pontiac Montana is changed by raising the hood, loosening both of the battery cables, and lifting them off the posts. The old battery can then be lifted out, a new battery put in, and the cables reattached.
To replace the 2002 Pontiac Montana battery disconnect both the battery cables from the terminals. Then, remove the screw to the battery holder, located behind the battery. Slide the battery slightly to the front of the vehicle and lift up. Reverse this procedure to put in a new battery.
Disconnect the positive battery cable and charge it with a slow charger. Clean and reconnect the cable once the battery is fully charged.
I replaced tge battery in my 2008 pontiac montana ''i took out the cross member and had to take the fuse box apart to get the old battery out when i put the new battery in and put the fuse box back together i got power to the car but no power to the starter '' have you any idea what could be the matter ;;thanks Jim
you will need to call a pontiac dealer and get an activation code, because of the anti-theift system.
Jump starting a Pontiac include jumper cables and another vehicle with a battery. A person will need to put jumper cables on each car battery to jump start it.
Pontiac Montana was created in 1999.
2001 Pontiac Montana?
that light usually means that the battery is going bad or that your alternator isn't charging anymore
Alternator is not putting out a charge.