You need three things. The special tool dipstick, a scan tool to read fluid temperature, and a chart from the service information that shows the proper level for the current temperature.
The newer Chrysler 300's have 2 options for the transmission. The one that is made by Mercedes does not have a dipstick and will require you to take it to a shop or the dealer to have your fluid level checked.
The engine and transmission each have oil pans on their lower sections.
Take it to your friendly Chrysler dealer. Checking the transmission fluid level on newer Chrysler transmissions require a special tool in addition to an OBDII scan tool.
I have never heard of an oil lid on a 300.
Total fill, 9.3 qts.
It requires a special tool, the dipstick, and a scan tool to read fluid temperature. The dealer or a transmission repair shop would be the places that have the necessary equipment.
at 61,000 miles as it states it on the owners manual.
how to check transmision oil on 2000/ 300 4trx atv
The trans oil is inside the transmission.
Check the wiring for the oil sensor. It is located by the oil filter, and could have been pulled loos during the change.
You can check the motor oil or the transmission fluid.
You have to take the oil pan off of the transmission.