ask a pool care tech at your local pool supplier.
Yes, you can use chlorine in a fiberglass pool. It is a common sanitizer for pools and helps to keep the water clean and free of bacteria. Just be sure to follow the manufacturer's guidelines for the proper amount of chlorine to use in your fiberglass pool to prevent damage.
To effectively repair fiberglass pool steps, you can follow these steps: Clean the damaged area thoroughly. Sand down the damaged area to remove any rough edges. Apply a fiberglass repair kit according to the manufacturer's instructions. Allow the repair to cure completely before using the pool. Regularly maintain and clean the pool steps to prevent future damage.
form_title= Fiberglass Pools form_header= Relax in the water with a fiberglass pool. Do you want a salt water pool?*= () Yes () No What size is your backyard?*= _ [50] What is your budget for a pool?*= _ [50]
To repair a fiberglass pool step, you can start by sanding down the damaged area, applying a fiberglass repair kit, and then sanding and painting over the repaired section to match the rest of the pool. It's important to follow the instructions carefully and ensure the area is clean and dry before starting the repair process.
Some advantages of fiberglass over other pool types include the quick installation since the pool is factory built. Also, they are easier to clean, use less chemicals and electricity for heating than concrete models.
Pool steps can be made of concrete or fiberglass, depending on the construction and size of your pool. Contact a local pool service about the steps. If your pool is properly maintained, there should be no reason to clean the steps. There should be no algae or anything else accumulating on any surface, so do get some professional advice..
Yes, fiberglass pools have a smooth finish. Where a concrete pool was a pourus and rougher finish that gives alge something to grab on to. Also staining it. A low calcium level can pit a concrete pool, not a fiberglass, plus a fiberglass pool is more flexible,so ground movement wont crack it. In the long run the extra money you pay for fiberglass is worth it.
Absolutely, But if you only have the land to fit a fiberglass pool, Your new gunite pool will be considerably smaller by about 1 foot all the way around. A fiberglass drop in pool is too small already, RIGHT? Kenny Kummer Brody Chemical
Hum, not sure if you can actually plaster a fiberglass pool. The glass would have to be removed first. You will have to consult a pool builder, a company that installs fiberglass shells or a company that installs fiberglass in plastered pools - thus converting a gunite/plaster pool into a gunite/fiberglass pool. The later uses the old pool shell as the sub-grade or foundation so to speak. k
No!!! Under no circumstances should you drain a fiberglass in-ground pool. Unlike the standard in-ground pool, the fiberglass pool base is unreinforced concrete or other hard surface material that was applied directly to the soil in a thin layer. It is only there to allow the fiberglass to be sprayed on and form a hard shell. The weight of the water is what holds the fiberglass in place. If you drain the pool without refilling it immediately, you will allow external ground pressures and/or ground water to buckle the sides or bottom and you will have the fiberglass completely redone.
Fiberglass pool shells are shipped in a single piece directly from the manufacturer. As a result, you don't actually linea pool with fiberglass the way you would with concrete or vinyl. Instead, installing a fiberglass pool simply means digging a hole in which to place the already completed shell.
Fiberglass pool steps offer benefits such as durability, low maintenance, slip resistance, and a smooth surface that is gentle on feet.