0
What else can I help you with?
What are the benefits of choosing fiberglass inground pool steps over other materials for your pool installation?
Fiberglass inground pool steps offer several advantages over other materials. They are durable, low maintenance, and resistant to chemicals and UV rays. Additionally, fiberglass steps are smooth and slip-resistant, providing a safe and comfortable entry into the pool.
Is fiberglass steps better than concrete steps for an in ground pool?
No, because fiberglass can make you slip unlike concrete steps
What would cause and how would you repair a fiberglass pool age unknown with rough texture on the steps and the feeling of fiberglass fibers in your skin after swimming?
We were getting fiberglass in our skin, so we had the pool resurfaced. They blasted away the old fiberglass an put a new coat in. It is supposed to last 12-15 years. Get the pool resurfaced. Find a company that REALLY KNOWS the business of resurfacing fiberglass.
Fiberglass steps pulling away from pool how do you fix?
There are kits available for fixing fiberglass steps that are pulling away from the pool. You will need to drain the water below the area where you will be working.
Where you can buy the fiberglass steps?
You can buy fiberglass steps, all sizes, many colors and finishes (brick, stone, granite, etc) from Mainely Fiberglass, Livermore, Maine. Wide delivery area. No website. Google for more location information. Very friendly and knowledgeable staff.
How can I effectively repair fiberglass pool steps?
To effectively repair fiberglass pool steps, you can follow these steps: Clean the damaged area thoroughly. Sand down the damaged area to remove any rough edges. Apply a fiberglass repair kit according to the manufacturer's instructions. Allow the repair to cure completely before using the pool. Regularly maintain and clean the pool steps to prevent future damage.
How do you get stains off plastic pool steps?
Vinyl liner pool steps are constructed of fiberglass, vinyl ester resin, and swimming pool gel coat. Staining (and blisters) occur around the pools 20th anniversary. It's caused by a breakdown of the white finish called swimming pool gel coat. Stains and blisters can only be removed by replacing the now porous gel coat with new nonporous swimming pool gel coat. Done properly, the new gel coat will last another 20 years.
What would cause fiberglass steps bleed or leak?
The fiber glass wasn't coated properly when it was manufactured
What are the steps of choosing the president and the vice president?
To nominate candidates.
Can i use acetone on fiberglass pool step?
Using acetone on fiberglass pool steps is not recommended, as it can damage the gel coat and the surface finish of the fiberglass. Acetone is a strong solvent that can cause discoloration, dullness, or even structural damage to the pool steps. Instead, consider using a mild soap solution or a cleaner specifically designed for fiberglass surfaces to safely remove stains or residues. Always test any cleaning product on a small, inconspicuous area first to ensure compatibility.
What is the correct order of steps to show how a cost-benefit analysis is done?
Be presented with a decision. List the costs of the decision. Figure out all of the benefits of the decision. Compare costs and benefits to see which is bigger. OR Come up with an option. Determine the costs of the decision. Calculate the amount of benefit that would be gotten from choosing the option. See if the benefits outweigh the costs to make a decision.
How can I Paint fiberglass steps inside a pool?
This can be done anytime, but it is easiest when the liner is being replaced. Lower the water level sufficiently to make the shallow end dry. Sand the gelcoat about halfway down to the fiberglass (about 1/32") using an orbital random sander with a 24grit sanding pad or paper. Don't worry about harming the fiberglass. Use a mouse sander or a Dremel in tight spots like the joining of the riser and step. Wash the steps clean with water and let dry overnight. Wash the steps with solvent, then apply one coating of swimming pool (not marine) gelcoat. When gelcoat is dry with no tackiness, roll-on a second coating. Let cure for 3 full days before covering with water. Enjoy your pool.
