answersLogoWhite

0

This can be done anytime, but it is easiest when the liner is being replaced. Lower the water level sufficiently to make the shallow end dry. Sand the gelcoat about halfway down to the fiberglass (about 1/32") using an orbital random sander with a 24grit sanding pad or paper. Don't worry about harming the fiberglass. Use a mouse sander or a Dremel in tight spots like the joining of the riser and step. Wash the steps clean with water and let dry overnight. Wash the steps with solvent, then apply one coating of swimming pool (not marine) gelcoat. When gelcoat is dry with no tackiness, roll-on a second coating. Let cure for 3 full days before covering with water. Enjoy your pool.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Is fiberglass steps better than concrete steps for an in ground pool?

No, because fiberglass can make you slip unlike concrete steps


What are the benefits of choosing fiberglass pool steps for your swimming pool?

Fiberglass pool steps offer benefits such as durability, low maintenance, slip resistance, and a smooth surface that is gentle on feet.


Fiberglass steps pulling away from pool how do you fix?

There are kits available for fixing fiberglass steps that are pulling away from the pool. You will need to drain the water below the area where you will be working.


What are the benefits of choosing fiberglass inground pool steps over other materials for your pool installation?

Fiberglass inground pool steps offer several advantages over other materials. They are durable, low maintenance, and resistant to chemicals and UV rays. Additionally, fiberglass steps are smooth and slip-resistant, providing a safe and comfortable entry into the pool.


What kind of paint should you use on fiberglass pool stairs?

They have special paint just for pools, one that will hold up under the water. For pool steps use a non skid pool paint, or if you can not find any non skid you can add some silica sand to the paint container. Any Paint supply store should have it and some homecenters.


Can you use enamel latex paint on fiberglass pool steps?

Latex-based paints are not likely to stick to fiberglas particularly well. You'll most likely have better results from an oil-based paint.


How can I effectively repair fiberglass pool steps?

To effectively repair fiberglass pool steps, you can follow these steps: Clean the damaged area thoroughly. Sand down the damaged area to remove any rough edges. Apply a fiberglass repair kit according to the manufacturer's instructions. Allow the repair to cure completely before using the pool. Regularly maintain and clean the pool steps to prevent future damage.


Can you color a fiberglass pool after installation?

Hmmm, probably not unless you resort to the lowly paint job. Not recommended.


What would cause and how would you repair a fiberglass pool age unknown with rough texture on the steps and the feeling of fiberglass fibers in your skin after swimming?

We were getting fiberglass in our skin, so we had the pool resurfaced. They blasted away the old fiberglass an put a new coat in. It is supposed to last 12-15 years. Get the pool resurfaced. Find a company that REALLY KNOWS the business of resurfacing fiberglass.


What materials are pool steps made out of and how do I clean them?

Pool steps can be made of concrete or fiberglass, depending on the construction and size of your pool. Contact a local pool service about the steps. If your pool is properly maintained, there should be no reason to clean the steps. There should be no algae or anything else accumulating on any surface, so do get some professional advice..


Fiberglass Pools?

form_title= Fiberglass Pools form_header= Relax in the water with a fiberglass pool. Do you want a salt water pool?*= () Yes () No What size is your backyard?*= _ [50] What is your budget for a pool?*= _ [50]


Can i use acetone on fiberglass pool step?

Using acetone on fiberglass pool steps is not recommended, as it can damage the gel coat and the surface finish of the fiberglass. Acetone is a strong solvent that can cause discoloration, dullness, or even structural damage to the pool steps. Instead, consider using a mild soap solution or a cleaner specifically designed for fiberglass surfaces to safely remove stains or residues. Always test any cleaning product on a small, inconspicuous area first to ensure compatibility.