Preferably remove them and soak them in gasoline for a couple of hours then blow dry with a compressor nozzle
Paper clips in the holes
There are many things that can be wrong with the jets on your Jacuzzi. One common problem that you can fix is bleeding the lines to the jets. Another reason why the jets may not be working is because the circuit breaker is tripped.
clean out the jets and any other holes that are clogged
clean jets and check fuel filter
I have an inground spa when I turn on the jets they start then stop. I have put pressure in the line nothing clean the filter nothing. What can I do
Clean out the carburettor and jets, clean or replace the fuel filter.
I would try a good quality carb. cleaner. If that does not work you may have to take it to a dealer for cleaning.
the jets are inside the carburetor. They look like brass pipes, they can be unscrewed. The jets have to be clean (the hole has to run all the way through the jet) in order for the engine to run.
Swiffer Wet Jets are safe for laminate flooring. To clean a hardwood laminate floor without damaging it, you should use a mop and hot water. Wring the mop out so it is not dripping wet.
Jets.
sounds like the low speed jets has some dirt in it clean the carb
CLEAN YOUR CARBS! If that doesn't solve it, put a little bit smaller jets. If that doesn't work, clean your exhaust, you may have a nest in there, same with your air box.