0
How do you clear the check engine light on 1997 astro van?
Travelingrunner
I already know the reason is a tranny issue causing the warning light but it still runs and drives great at this time. I only want to reset the light until the trans is actually bad enough to need the $2500 repair.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why check engine lights flash on 1997 Chevy astro van?
A flashing check engine light is an indication of a misfire.
How do you turn off the check engine light on a Chevy Astro Van?
You will need to have the engine scanned by a repair shop. That will give them codes to repair it. Once repaired they will clear the light. Clearing the light does not repair the problem. ***See discussion area for my dispute of this above answer****
How do you clear check engine light in a Kia Sorento?
Trying to clear the check engine light in a Kia Sorento yourself is not recommended. The check engine light could indicate a serious problem and the car should be inspected by someone qualified.
Turn off check engine light on 2000 Chevy Prizm?
I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
Check gauges light on Chevrolet astro van stays on?
gage of temperature go to hot position but is not hot the engine check gages light come on
How do you re-set the check engine light on a 2007.5 Dodge 6.7 Cummins Diesel engine?
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
Were is the check engine light fuse on a 2007 dodge caliber?
There isn't a single fuse for the check engine light. See related questions for explanations of why the light comes on and how to clear it.
Check engine light stays on Nissan Pulsar n16 how to clear codes?
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
Can you just clear check engine light go to NJ inspection and pass?
No, a person cannot just clean a check engine light to pass inspection. The issue causing the check engine light must be dealt with and fixed.
Why doesn't your service engine soon light come on when you go to start your 2003 astro?
If you are referring to the Check Engine light then the bulb is either blown or has been blacked out on the dash by a crook.
How do you reset check engine light on a 2000 gm sonoma?
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
What is the timing for a 91 astro van?
Timing is 0 degrees. To do this you must disconnect the single wire connector near this distributor. It is a TAN with a BLACK stripe. Start Engine, the check engine light will be on this is OK you will clear it in the next step. Set TIMING to 0 degrees. Then turn off ignition and disconnect the battery for 1 minute this will clear the check engine light. Reconnect the TAN with Black Stripe wire connector. now reconnect the battery. Start your engine. That's it your done.
