Want this question answered?
The price for a Tajima embroidery machine will vary depending on the size of the machine. Smaller embroidery machines can be purchased around $400 where as larger machines can cost up to $2800.
how to fix tajima 321 error
You can get the instruction manual from Stitch It Intl (link below).
Hirsch Int is the United states distributer for Tajima if it is available , they will have it. Please go to the Related Links and visit that site. It is possible that there is an online manual there. Anther possibility is a local store which sells sewing and embroidery machines.
Check with http://www.PLRElectronics.com or http://www.madpunch.com It means that your X or Y driver (boards) are bad....
A Japanese silk wholesale company
The manual said to check the belt and sure enough it was broken in half. Unscrew the panel on the left hand side of the machine, where you put the allen wrench in to manually turn the needles up and down. The belt is right there. $110.00 to replace.
First, return the main shaft to the fixed position, then check the encoder signal by moving the little wheel with all the degrees on it to the RED area. If this does not correct the problem, contact the manufacturer.
machine fool
If you are just getting started I would recomend the Tajima machines, they are the best out there. They cost a little more but have a higher resale value when and if you decide to sell your business or want to upgrade. Most machines are good and built pretty much the same. The control panel and it's ease of use is important to look at and the biggest factor I always tell people to consider is the service. How well will this company service their machine? Call some people who have purchased one from them and see what they have to say. I would also consider a used machine with some kind of warranty. This way you don't have the big loss in value when "you drive it off the lot". If for some reason you decide it is not for you then you can sell the machine and get most of your money back.
The CPU board is bad an needs to be repaired by a circuit board repair company. www.plrelectronics.com for example The CPU Software has corrupted, get a EX.sys disk from Tajima or find the one that came with the machine and Initialize the CPU from the Floppy Drive built into the machine. Very Rarely the CPU is actually faulty, unless you are very rich ... $3000 rich. Regards, Masis.com
The cast of Tajima - 2011 includes: Nobuhiro Tajima